A 3-Bit Pseudo Flash ADC Based Low-Power CMOS Interface Circuit Design for Optical Sensor - Université de Bourgogne Accéder directement au contenu
Article Dans Une Revue Journal of Low Power Electronics Année : 2015

A 3-Bit Pseudo Flash ADC Based Low-Power CMOS Interface Circuit Design for Optical Sensor

Résumé

The paper presents a CMOS interface circuit design for optical pH measurement that can produce an 8-bit digital output representing the color information (i.e., wavelength, l). In this work we are focusing at reducing the component count by design and hence reducing the cost and silicon area. While it could be further optimized for lower power consumption, the proposed design has been implemented using standard cells provided by the foundry (i.e., AMS 0.35 m CMOS) for proof of concept. The biasing current and power consumption of the fabricated chip are measured at 11 A and 37 W respectively using 3.3 V supply voltage. Experimental results have further validated the proposed design concept. The number of detectable colors is eight and can be extended to a higher number without any major change in the architecture.

Domaines

Electronique
Fichier principal
Vignette du fichier
MaherAssaad_JOLPE_19Sep14.pdf (2.09 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01196578 , version 1 (20-03-2019)

Identifiants

Citer

Maher Assaad, Mousa Mohsen, Dominique Ginhac, Fabrice Meriaudeau. A 3-Bit Pseudo Flash ADC Based Low-Power CMOS Interface Circuit Design for Optical Sensor. Journal of Low Power Electronics, 2015, 11 (1), pp.93-102. ⟨10.1166/jolpe.2015.1365⟩. ⟨hal-01196578⟩
123 Consultations
141 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More